Updated 1Y0-440 Dumps Questions Are Available [2022] For Passing Citrix Exam
Free UPDATED Citrix 1Y0-440 Certification Exam Dumps is Online
NEW QUESTION 49
Scenario: A Citrix Architect has deployed Citrix Gateway integration with the StoreFront server. The Vasco server is used to perform WebAUTH to authenticate users The configuration snippet is as follows:
Which parameter is utilized to calculate the content-length insert in the request sent to the server?
- A. Expl
- B. Exp2
- C. successRule
- D. POST expresston
Answer: B
NEW QUESTION 50
Scenario: A Citrix Architect has deployed Authentication for the SharePoint server through NetScaler. In order to ensure that users are able to edit or upload documents, the architect has configured persistent cookies on the NetScaler profile.
Which action should the architect take to ensure that cookies are shared between the browser and non- browser applications?
- A. The SharePoint load-balancing VIP FQDN and the AAA VIP FQDN should be in the trusted site of the client browser.
- B. The Secure flag must be enabled on the cookie.
- C. The time zone should be the same on the NetScaler, client, and SharePoint server.
- D. The cookie type should be HttpOnly.
Answer: A
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX209054
NEW QUESTION 51
Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version
12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall. The Cisco ASA Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.
The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer's security team:
The NetScaler MPX device:
* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.
* needs to protect backend servers from overloading.
* needs to queue all the incoming requests on the virtual server level instead of the service level.
* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and
* phishing proxies.
* should provide flexibility to enforce the decided level of security check inspections for the requests originating from a specific geolocation database.
* should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote ("); backslash (\); and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.
Which security feature should the architect configure to meet these requirements?
- A. geolocation-based blocking using Responder policies
- B. Global Server Load Balancing with Mac Based Forwarding
- C. Global Server Load Balancing with DNS views
- D. Geolocation-based blocking using Application Firewall
- E. Global Server Load balancing with Dynamic RTT
Answer: D
NEW QUESTION 52
Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.
The issue was isolated to several endpoint analysis (EPA) scan settings.
Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.
Which setting is preventing the security requirements of the organization from being met?
- A. Item 1
- B. Item 7
- C. Item 2
- D. Item 6
- E. Item 3
- F. Item 4
- G. Item 5
Answer: G
NEW QUESTION 53
Which two features are supported on LbaaSV1? (Choose two.)
- A. Layer 4 Load balancing
- B. Certificate Bundle
- C. Server name Indicator
- D. Layer 7 Load Balancing
- E. Cookie Insertion
Answer: A,C
NEW QUESTION 54
What can help a Citrix Architect prepare to discuss time scales and resource requirements?
- A. Designing the new environment.
- B. Identifying challenges associated with the project.
- C. Creating a high-level project plan.
- D. Meeting with each member of the project team to assign tasks.
- E. Setting expectations with the project's key stakeholders.
Answer: C
NEW QUESTION 55
Scenario: A Citrix Architect needs to design a hybrid XenApp and XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* About 3,000 remote users are expected to regularly access the environment
* Multi-factor authentication should be used for all external connections
* Solution must provide load balancing for backend application servers
* Load-balancing services must be in Location B
Click the Exhibit button to view the conceptual environment architecture.
The architect should use ________ in Location A, and should use _________ in Location B.
(Choose the correct option to complete the sentence.)
- A. Citrix Gateway as a Service, Citrix ADC (BYO)
- B. Citrix Gateway as a Service, no NetScaler products
- C. Citrix Gateway as a Service, Citrix ICA Proxy (cloud-licensed)
- D. No Citrix products; Citrix Gateway appliance
- E. No Citrix products, Citrix ADC (BYO)
- F. No Citrix products, Citrix ICA Proxy (cloud-licensed)
Answer: A
NEW QUESTION 56
Scenario: A Citrix Architect needs to configure a Content Switching virtual server to provide access to www.workspacelab.com. However, the architect observes that whenever the user tries to access www.worksapcelab.com/CITRIX/WEB, the user receives a "503 - Service Unavailable" response. The configuration snippet is as follows:
What should the architect modify to resolve this issue?
- A. add cs policy Pol3 -rule "http.REQ.URLPATH_AND_QUERY.con
- B. add cs policy Pol3 -rule "http.REQ.URLcontainsf'citrix")" -action Act3
- C. add cs policy Pol3 -rule "http.REQ.URL.containsC'WEB")" -action Act3
- D. set cs vserver Vserver -caseSensitive ON
Answer: A
NEW QUESTION 57
What are three potential risks when examining the disaster recovery plan and implementation for a company?
(Choose three)
- A. A disaster recovery plan exists but has never been tested
- B. A disaster recovery location does NOT exist.
- C. Optimal Gateway Routing decisions are NOT understood
- D. Supporting infrastructure for proposed environment is NOT included in disaster recovery implementation
- E. Users require mobile devices with continuous access
Answer: A,B,D
NEW QUESTION 58
Scenario: A Citrix Architect needs to assess an existing NetScaler Gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.
Click the Exhibit button to view the information collected by the architect.
Which configurations should the architect change to meet all the stated requirements?
- A. Item 2
- B. Item 5
- C. Item 3
- D. Item 1
- E. Item 4
Answer: D
NEW QUESTION 59
A Citrix Architect needs to configure advanced features of NetScaler by using StyleBooks as a resource in the Heat service.
What is the correct sequence of tasks to be completed for configuring NetScaler using the Heat stack?
- A. 1. Install NetScaler Bundle for OpenStack2. Deploy the Heat stack3. Register OpenStack with NMAS4.
Add NetScaler instances (Optional)5. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource6. Create service packages (Add OpenStack tenants) - B. 1. Install NetScaler Bundle for OpenStack2. Add NetScaler instances (Optional)3. Create service packages (Add OpenStack tenants)4. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource5. Register OpenStack with NMAS6. Deploy the Heat stack
- C. 1. Install NetScaler Bundle for OpenStack2. Register OpenStack with NMAS3. Add NetScaler instances (Optional)4. Create service packages (Add OpenStack tenants)5. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource6. Deploy the Heat stack
- D. 1. Install NetScaler Bundle for OpenStack2. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource3. Register OpenStack with NMAS4. Deploy the Heat stack5. Add NetScaler instances (Optional)6. Create service packages (Add OpenStack tenants)
Answer: D
NEW QUESTION 60
Scenario: A Citrix Architect is asked by management at the Workspacelab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing Citrix ADC configuration. Currently, the Citrix ADC MPX devices are configured in a high availability pair, and the outbound traffic is load balanced between two Internet service providers (ISPs).
However, the failover is NOT happening correctly. The following requirements were discussed during the design requirement phase:
* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
* The link should fail over even if the ISP router is up and intermediary devices to an ISP router are down.
* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously. What should the architect configure to meet this requirement?
- A. Transparent monitor
- B. HTTP-ECV monitor wit" secure option enabled
- C. HTTP-ECV monitor without secure option enabled
- D. Ping Monitor
Answer: A
NEW QUESTION 61
Scenario: A Citrix Architect needs to design a new multi-datacenter NetScaler deployment. The customer wants NetScaler to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment.
Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment, based on the stated requirements?
- A. Least response time
- B. least connection
- C. Static proximity
- D. Least packets
- E. Source IP hash
- F. Dynamic round trip time (RTT)
Answer: A
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/netscaler/12/global-server-load-balancing/methods/configuring- algorithm-based-methods.html
NEW QUESTION 62
Which two features are supported on LbaaSV1? (Choose two.)
- A. Layer 4 Load balancing
- B. Certificate Bundle
- C. Layer 7 Load Balancing
- D. Server name Indicator
- E. Cookie Insertion
Answer: A,C
NEW QUESTION 63
Which markup language can a Citrix use along with NITRO API to create a StyleBook?
- A. XML
- B. GML
- C. HTML
- D. YAML
Answer: D
NEW QUESTION 64
Which four load-balancing methods support Citrix ADC Virtual Server-Level Slow Start? (Choose four.)
- A. SRCIPSRCPORTHash
- B. Least Connection
- C. Least response time
- D. Least bandwidth
- E. URLHash
- F. LRTM
- G. Least Packets
Answer: B,C,D,F
NEW QUESTION 65
Scenario: A Citrix Architect needs to deploy a NetScaler appliance for Workspacelab, which will provide application load balancing services to Partnerlab and Vendorlab.
The setup requirements are as follows:
* A pair of NetScaler MPX appliances will be deployed in the DMZ network.
* High availability will be accessible on the NetScaler MPX in the DMZ Network.
* Load balancing should be performed for the mail servers for Partnerlab and Vendorlab.
* The traffic for both of the organizations must be isolated.
* Separate Management accounts must be available for each client.
* The load-balancing IP addresses must be identical.
* A separate VLAN must be utilized for communication for each client.
Which solution can the architect utilize to meet the requirements?
- A. Admin Partition
- B. VLAN Filtering
- C. Traffic Domain
- D. VPX or MPX
Answer: D
NEW QUESTION 66
Scenario: A Citrix Architect has met with a team of Workspacelab members for a design discussion. They have captured the following requirements for NetScaler design project:
* The authentication must be deployed for the users from the workspacelab.com and vendorlab.com domains.
* The workspacelab users connecting from the internal (workspacelab) network should be authenticated using LDAP.
* The workspacelab users connecting from the external network should be authenticated using LDAP and RADIUS.
* The vendorlab users should be authenticated using Active Directory Federation Service.
* The user credentials must NOT be shared between workspacelab and vendorlab.
* Single Sign-on must be performed between StoreFront and NetScaler Gateway.
* A domain drop down list must be provided if the used connects to the NetScaler gateway virtual server externally.
Which method must the architect utilize for user management between the two domains?
- A. Create shadow accounts for the Vendorlab domain in the Workspacelab domain.
- B. Create a global catalog containing the objects of Vendorlab and Workspacelab domains.
- C. Create a two-way trust between the Vendorlab and Workspacelab domains.
- D. Create shadow accounts for the users of the Workspacelab domain in the Vendorlab domain.
Answer: B
NEW QUESTION 67
Scenario: A Citrix Architect observes the following configurations while performing an assessment of a Citrix ADC deployment:
* Citrix Gateway virtual server nsg-dmz-001 is configured in ICA Proxy mode.
* The authentication method used is Plaintext LDAP.
* The session policies bound are configured to integrate with StoreFront in ICA proxy mode to perform Single Sign-on.
* The connection to LDAP server is performed using SNIP by Citrix ADC.
* To meet the new design requirement the architect needs to change the SNIP used for communication with LDAP servers.
Which AAA parameter must the architect verify to update the source IP address for the communication from Citrix ADC to the LDAP server?
- A. aaadnatip
- B. AAA Session IP
- C. NetProfile
- D. MappedlPAddress
Answer: A
NEW QUESTION 68
A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a Citrix ADC____deployed________. (Choose the correct option to complete sentence:
- A. CPX: without partitions
- B. CPX; In high availability
- C. MPX; In high availability
- D. SDX; with more than 6 partitions
- E. MPX; as a cluster Instance
Answer: C
NEW QUESTION 69
......
Citrix Exam 2022 1Y0-440 Dumps Updated Questions: https://pass4sure.actualtorrent.com/1Y0-440-exam-guide-torrent.html