C1000-082 Actual Questions 100% Same Braindumps with Actual Exam!
C1000-082 Study Material, Preparation Guide and PDF Download
NEW QUESTION # 26
Which command helps to protect the IBM Spectrum Protect server in case of a database failure?
- A. DEFINE DBBACKUP
- B. PREPARE
- C. PROTECT DB
- D. BACKUP DB
Answer: D
Explanation:
The command that helps protect the IBM Spectrum Protect server in case of a database failure is "BACKUP DB." Backing up the Spectrum Protect database protects against data loss due to hardware failure [1], software problems, or other emergencies that might cause a total loss of the database. The BACKUP DB command creates a backup copy of the IBM Spectrum Protect database.
If a database failure occurs, the backup can be used to restore the database to a known state.
It is important to periodically perform backups of the IBM Spectrum Protect server database to ensure that the data is protected in the event of a failure [1]. Detailed instructions for performing backups can be found in the IBM Spectrum Protect V8.1.9 documentation.
https://www.ibm.com/docs/en/spectrum-protect/8.1.0?topic=troubleshooting-resolving-server-problems
NEW QUESTION # 27
What does an administrator need to configure to configure client diagnostics from the Operations Center?
- A. client management services
- B. client system log enabler
- C. client acceptor daemon
- D. client remote agent
Answer: A
Explanation:
an administrator needs to configure client management services to configure client diagnostics from the Operations Center. The client management service enables the IBM Spectrum Protect server administrator to view diagnostic information from the Operations Center.
https://www.ibm.com/docs/en/spectrum-protect/8.1.0?topic=windows-installing-client-management-service
NEW QUESTION # 28
What is the purpose of the client option TXNBYTELIMIT?
- A. It sets the maximum size of an upload transaction between IBM Spectrum Protect and IBM Spectrum Protect Plus.
- B. It sets the maximum number of client session transactions during the backup window.
- C. It sets the maximum number of objects in a client session transaction.
- D. It sets the maximum size included in a single client session transaction.
Answer: D
Explanation:
According to IBM documentation1, the client option TXNBYTELIMIT specifies the number of kilobytes that the client program buffers before sending data to the server. This option affects how often data is sent to the server during backup and archive operations.
https://www.ibm.com/docs/SSEQVQ_8.1.8/client/c_opt_clioptref.html
NEW QUESTION # 29
How can IBM Spectrum Protect recovery log usage be obtained?
- A. QUERY LOG
- B. QUERY DBSPACE
- C. QUERY DB T=LOG
- D. QUERY DBLOG
Answer: D
Explanation:
You can use the QUERY DBLOG command in Spectrum Protect to obtain recovery log usage. This command displays information about the logs that are currently active and the logs that have been archived or deleted. Specifically, the command provides details about the total amount of recovery log space allocated, the amount of space currently used, and the amount of space that is still available for use.
To run this command, you can use the following steps:
Open the Spectrum Protect Administrative Client.
Connect to the Spectrum Protect instance.
In the command line, type q dblog.
Press Enter.
Once you execute the command, you will see the information about the recovery log usage displayed on the screen.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=utilities-administrative-commands
NEW QUESTION # 30
What is the purpose of defining an alert trigger?
- A. to define custom message numbers for server events
- B. to change the category of existing alerts on the server
- C. to specify the number of times a specific message must be issued before an alert is triggered
- D. to report an alert whenever a server issues a specific error message
Answer: D
Explanation:
"to report an alert whenever a server issues a specific error message." This information can be found in the first search result [1], which explains that defining an alert trigger allows you to specify a specific condition that, when met, will cause an alert to be generated. The example given is when a specific error message is issued by the server. This alert can help administrators quickly identify and address issues with the server.
According to the IBM documentation, the purpose of defining an alert trigger in IBM Spectrum Protect (formerly known as Tivoli Storage Manager) is to report an alert whenever a server issues a specific error message or warning message. This alert can be sent to a specific user or group of users via email, pager, or other notification methods, allowing them to take appropriate action to resolve the issue.
https://www.ibm.com/docs/en/spectrum-protect/8.1.3?topic=center-sending-email-alerts-administrators
NEW QUESTION # 31
What are three required components of an IBM Spectrum Protect server?
- A. archive log failover
- B. database
- C. active log mirror
- D. archive log
- E. directory-container storage pool
- F. instance directory
Answer: B,C,F
Explanation:
According to the IBM Documentation1, three required components of an IBM Spectrum Protect server are:
Database: The database stores information about server operations, client nodes, storage pools, backup data, and other server-related data. The database is essential for server operation and recovery.
Active log: The active log records changes to the database that occur during normal server operation. The active log is used to recover the database after a system failure or a planned shutdown.
Instance directory: The instance directory contains configuration files, license files, security files, and other files that are specific to a server instance. The instance directory is also used to store temporary files during server operation.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=servers-whats-new
NEW QUESTION # 32
What do dissimilar policies provide in IBM Spectrum Protect node replication between source and target servers?
- A. differing administrative client owners
- B. differing client node names
- C. differing retention of data
- D. differing prioritization of client replication operations
Answer: C
Explanation:
In IBM Spectrum Protect node replication, dissimilar policies provide the ability to replicate client data between source and target servers with differing retention settings.
Dissimilar policies allow for more granular control over the retention settings of client data on the target server, which can be different from the retention settings on the source server. This means that the data can be kept for a longer or shorter period of time on the target server compared to the source server, based on the specific retention policies configured for the target server.
According to IBM documentation1, dissimilar policies provide the ability to use different management policies on the target replication server than on the source replication server. This means that you can have different retention periods, storage pools, or data types for replicated data on the target server. You can enable this feature by using the SET DISSIMILARPOLICIES command.
https://www.ibm.com/docs/SSEQVQ_8.1.9/srv.reference/r_cmd_dissimilarpolicies_set.html
NEW QUESTION # 33
Which statement is true regarding client-side and server-side deduplication?
- A. Client-side deduplication only eliminates the deduplication workload on the server for that workload when a Deduplication Cache is configured on the client.
- B. Client-side deduplication generally eliminates the deduplication workload on the server for that particular client workload.
- C. Server-side deduplication uses the Deduplication Cache to generate a hash code to be sent to the client, in order to run the client-side deduplication
- D. Client-side deduplication only works when there is a Deduplication Cache configured on the server.
Answer: B
Explanation:
According to the IBM Spectrum Protect documentation1, one statement that is true regarding client-side and server-side deduplication is B. Client-side deduplication generally eliminates the deduplication workload on the server for that particular client workload. This statement means that when client-side deduplication is enabled, the backup-archive client removes redundant data before sending it to the server, which reduces the amount of data that needs to be processed by the server.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=throughput-tuning-client-side-data-deduplication
NEW QUESTION # 34
What is true regarding IBM Spectrum Protect for Mail?
- A. It backs up Exchange Server databases by using Microsoft VSS.
- B. The backups provide an Exchange Server database integrity check function and a zeroing function.
- C. Backups follow an incremental full forever policy.
- D. It backs up Exchange Server Database Availability Group (DAG) databases using distinct nodes.
Answer: A
Explanation:
According to the IBM Spectrum Protect for Mail documentation1, it backs up Exchange Server databases by using Microsoft VSS.
NEW QUESTION # 35
Which three parameters are required to set server-to-server communication?
- A. high level address
- B. admin name
- C. server password
- D. server certificate
- E. admin password
- F. low level address
Answer: A,C,F
Explanation:
According to IBM documentation1, to define a server for server-to-server communications, you need to use the DEFINE SERVER command and specify three parameters: SERVERNAME, HLADDRESS, and LLADDRESS. The SERVERNAME parameter is the name of the server that you are defining. The HLADDRESS parameter is the high-level address of the server that you are defining. The LLADDRESS parameter is the low-level address of the server that you are defining.
NEW QUESTION # 36
Which component is automatically installed and configured during IBM Spectrum Protect installation that collects data to be used by support in case of any problem with the server?
- A. systemview
- B. perfmon
- C. servermon
- D. datacollect
Answer: A
Explanation:
According to IBM Spectrum Protect documentation1, a component that is automatically installed and configured during IBM Spectrum Protect installation that collects data to be used by support in case of any problem with the server is systemview1. Systemview is a tool that collects configuration and performance data from IBM Spectrum Protect servers and clients. It can help diagnose problems and optimize performance. https://www.ibm.com/support/pages/collecting-data-spectrum-protect-v7-server-install-or-upgrade
NEW QUESTION # 37
What is automatically discovered by the command CmsConfig discover?
- A. client services
- B. valid server stanzas
- C. client options files and log files
- D. client variables DSMI_DIR and DSMI_CONFIG
Answer: C
Explanation:
According to IBM Spectrum Protect documentation1, what is automatically discovered by the command CmsConfig discover is options files and log files1. Options files and log files are files that contain configuration settings and diagnostic information for IBM Spectrum Protect clients. The CmsConfig discover command can help to ensure that the client management service can access these files and make them available for diagnosis in the Operations Center.
NEW QUESTION # 38
Which SCHEDMODE enables the scheduler to process the client deployment schedule immediately?
- A. initial
- B. prompted
- C. immediate
- D. polling
Answer: B
Explanation:
According to IBM documentation1, SCHEDMODE prompted enables the scheduler to process the client deployment schedule immediately. SCHEDMODE prompted can be used with the autodeploy option to start a backup operation as soon as a new client node is registered.
Schedmode - IBM Documentation
NEW QUESTION # 39
A technician has removed all the tapes from a tape library to work on the gripper. When finished, the tapes are returned to random slots. Which command should be done on the IBM Spectrum Protect server to ensure the library inventory is correct?
- A. AUDIT LIBRARY
- B. LABEL LIBVOL
- C. UPDATE INVENTORY
- D. AUTOLOADER INVENTORY
Answer: A
Explanation:
According to IBM Spectrum Protect documentation1, a command that should be done on the IBM Spectrum Protect server to ensure the library inventory is correct is AUDIT LIBRARY2. AUDIT LIBRARY is a command that synchronizes the server inventory with the inventory of the library device. It can detect and resolve inconsistencies between the two inventories, such as missing or relocated volumes.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=utilities-administrative-commands
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=ac-audit-library-audit-volume-inventories-in-automated-library
NEW QUESTION # 40
Which three processes can be in order to prepare for Disaster Recovery?
- A. migrate node
- B. expiration
- C. protect storage pool
- D. backup storage pool
- E. node replication
- F. reclamation
Answer: C,D,E
Explanation:
According to the IBM Spectrum Protect documentation1, three processes that can be used to prepare for disaster recovery are:
Protect storage pool: This process creates a copy of a primary storage pool on another server or device. The copy can be used to restore data if the primary storage pool is damaged or lost.
Node replication: This process replicates data from one server node to another server node. The replicated data can be used to recover client data if the source server node is unavailable.
Backup storage pool: This process backs up data from a primary storage pool to another storage pool. The backup storage pool can be used to restore data if the primary storage pool is corrupted or deleted.
NEW QUESTION # 41
A department has a business requirement that all their backups are encrypted to prevent data from being read during the transmission to the server and also once written in the storage pool. Which encrypted method satisfies all those requirements?
- A. server-side encryption
- B. tape drive encryption
- C. SSL encrypted communication
- D. client-side encryption
Answer: D
Explanation:
According to IBM's documentation12, client-side encryption is a method of encrypting data before it is sent to the server for backup or archive operations. Client-side encryption uses a password that is entered by the user to generate an encryption key. The password needs to be confirmed when encrypting the file for backup, and also needs to be entered when performing restores of encrypted files12.
Client-side encryption satisfies all the requirements of encrypting data during transmission and storage, because:
It prevents data from being read during transmission, because the data is encrypted before it leaves the client system3.
It prevents data from being read once written in the storage pool, because the data remains encrypted on the server and can only be decrypted with the password that is known by the user3.
NEW QUESTION # 42
How can an administrator be designated as an approval administrator?
- A. update the admin with the CMDAPPROVER=YES option
- B. update the list of the admins in the set COMMANDAPPROVAL command
- C. issue the command GRANT APPROVERSANDMINS=ALL
- D. issue the command SET APPROVERSREQUIREAPPROVAL=ALL
Answer: C,D
Explanation:
According to IBM's documentation1, server-side deduplication is the process of removing redundant data during a backup operation on the server system. Server-side deduplication is especially effective when you want to conserve disk space on the server storage pools.
To optimize the performance of server-side deduplication, two items that should be examined are:
The storage for the database provides sufficient IOPS. IBM recommends using a high-performance disk for the database and ensuring that it has a minimum capability of 3000 IOPS1.
The server has sufficient memory. IBM recommends allocating at least 1 GB of memory for each TB of data that is backed up each day2.
NEW QUESTION # 43
Which type of client backup can be restored without having access to the server?
- A. retentionset
- B. backupset
- C. full backup
- D. journal-based backup
Answer: B
Explanation:
According to IBM documentation1, a backup set is a collection of your files that reside on the server, onto portable media created on a device using a format that is compatible with the client device. You can restore data from a backup set without having access to the server by using the dsmc restore backupset command1.
https://www.ibm.com/docs/en/spectrum-protect/8.1.12?topic=clients-restoring-your-data
NEW QUESTION # 44
What are clients at-risk in the Operation Center?
- A. clients that are running older clients with security vulnerabilities
- B. clients that are potentially infected by ransomware
- C. clients without successful backup based on the policy
- D. clients that are running low on disk space
Answer: C
Explanation:
According to IBM documentation1, clients at-risk in the Operation Center are clients without successful backup based on the policy. The Operation Center shows a large number of "At Risk" clients even though backups are completing normally if the number of "At Risk" clients is larger than the number of failed client backups.
https://www.ibm.com/support/pages/operation-center-showing-high-number-risk-clients
NEW QUESTION # 45
Which option should be specified when configuring a storage agent for optimal LAN-free backup and restore performance?
- A. LANFREESHM YES
- B. LANFREESSL SHAREDMEM
- C. ENABLELANFREE SHMMEM
- D. IANFREECOMMMETHOD SHAREDMEM
Answer: A
Explanation:
According to the IBM Spectrum Protect and Spectrum Scale Integration Guide1, one option that should be specified when configuring a storage agent for optimal LAN-free backup and restore performance is LANFREESHM YES. This option enables the use of shared memory for communication between the storage agent and the server, which can improve throughput and reduce CPU usage.
https://community.ibm.com/community/user/storage/blogs/nils-haustein1/2020/02/29/lan-free-backup-ibm-spectrumscale
NEW QUESTION # 46
......
C1000-082 Certification Study Guide Pass C1000-082 Fast: https://pass4sure.actualtorrent.com/C1000-082-exam-guide-torrent.html